• Cabinet : Laminar airflow cabinet is constructed out of 18 mm Duro Board Teak Wood, which is terminate and insect proof fire and weather resistant, Front, Back, Top and exterior surfaces are covered with white DECOLAM or FORMICA interior surfaces are epoxy painted.
• Upper Chamber : Its top is fitted with pre-filters for filtration. it is made of re-useable synthetic fiberglass, and is washable also. It retains all major impurities of air sucked inside the laminar flow.
• Main Chamber : It consists of main work surface, which is made of MICA TOP or STAINLESS STEEL.
• Side Panels : Made of 6-mm thick transparent Plexiglass framed in anodized aluminum angle frame.
• Front Panels : Made of folding transparent glass. It can be folded upwards while working inside the main chamber.
• Protective Screen : Non-Shedding, non-corrosive protects filters, white stove painted protective screen in the main chamber.
• Exhaust Fan : Exhaust is fitted below the main chamber it sucks the used air from the main chamber and throws out of the laminar flow. An exhaust do not is also provided here, which takes this air out of the room. Exhaust can be provided at an extra cost. (Optional)
• Airflow And Filtration : Laminar flow principle involves double filtration of air. Atmospheric air is drawn through prefilter and is made to pass through highly effective HEPA FILTER efficiency particular air. Filter having efficiency rating as high as 99.99% with cold DOP and 99.97% hot DOP. Thus retaining all airborne particles of size 0.3 micron and larger. Double filtered air blows in laminar flow through the work table at designed velocity of 90ft.min +20%.
• Blower Motor Assembly : Duly balanced, direct drive motor blower units sized to provide adequate airflow volume over the entire surface of HEPA filter.
• Lighting : Work are properly illuminated by diffused glare free fluorescent light.
• UV Germicidical Light : Are fitted inside the cabinet / work-area.
• Easy Mobility : The whole body is provided with four Nos. castor wheels at the bottom for easy mobility to any place.
  

• Stainless steel table in Lieu of sunmica table at an extra.
• Exhaust system at an extra
• Exhaust ducting/ at an extra per running feet
• Virous Burn out unit for environment protection at an extra.
  

Model	LV-22	LV-32	LV-42	LV-62	Lv-82
Working Size	2'x2'x2'	3'x2'x2'	4'x2'x2'	6'x2'x2'	8'x2'x2'
Size of HEPA Filter	2'x2'x6'	3'x2'x6'	4'x2'x6'	3'x2'x6'	4'x2'x6'
No. of HEPA Filter	1	1	1	2	2
Illumination	1 x 20w	1 x 20w	2 x 40w	2 x 40w	4 x 40w
Exhaust System	Extra	Extra	Extra	Extra	Extra
Exhaust Ducting/Feet	Extra	Extra	Extra	Extra	Extra
S.S.Table in lieu of Sumica Top	Extra	Extra	Extra	Extra	Extra